Sea&Sea MDX-α6300 for SONY a6000/a6300/a6500

[说明]

• 新‘ML’ 接座镜头罩
• 人体工学设计
• 配备 SA8 固定圆球底座
• 相机的 LCD 银幕可以倾斜 10 度
• 全功能控制
• 双光纤闪灯接座
• 防水壳前端有镜头解锁按钮, 方便更换镜头
• 相机内闪可以透过机身的按钮与拨杆启动或收起.
• 漏水侦测器选购, 指示灯位于LCD银幕边
• 手腕带选购, 如不使用底座握把可选购手腕带单手操作
• 内建双"sacrificial zinc diodes" (防电解度锌二极体 ,一个在前端, 一个在后盖) 防止电解伤害
• (有关电解伤害, 请参阅: Electrolysis Can Eat Your Prop)

[支援镜头]

ML 镜头罩支援底下镜头:

• Sony 16mm f/2.8 Wide Angle lens,
• Sony 30mm f/3.5 Macro lens,
• Sony 16-50mm f/3.5-5.6 Zoom lens.
• Conversion lenses VCL-ECU1 and VCL-ECF1 are also supported.
• The Sony 10-18mm Wide Angle Zoom lens and VCL-ESU1 conversion lens may be used when the ML Extension Ring 25 (#30122)0 is added.

有关搭配可参考镜头罩系统: System Chart for MDX Mirrorless Housings(for Sony)

[规格]

[材质] 耐腐蚀铝合金, galvanized (black)
[耐水深] 100m/330ft
[尺寸 (WxHxD)] 195 x 125 x 100mm
[重量] 约 1,265g (单防水壳)

[相容性说明]

The MDX-α6300 is now compatible with the SONY α6500 camera.
The latest MDX-α6300 housing is, therefore, compatible with the SONY α6000, α6300 and α6500 cameras.
* When the housing accommodates the α6500, the camera’s C1/C2 buttons cannot be used.
* MDX-α6300 housings with the following serial numbers (last four digit numbers) are compatible with all the aforementioned cameras;

黑色: 0020 - 0028 and above 0037
Orange: 0004, 0005, 0009 and 0010
Light Blue: Above 0004

* MDX-α6300 housings with serial numbers other than those listed above are only compatible with α6000 and α6300 cameras.