品牌: INON
Model: 4562121438521
[说明]
INON Shoe Base 热靴转接座 圆球
以“球头”作为接头转接座的热靴座，用途广泛，能透过“箝制夹 III”和其他 INON II 代灯臂系统的配件相容
[特色]
可搭配三脚架云台使用
直接安装在防水壳的“冷靴座”上或是 INON“热靴垫片”
热靴座的街头转接座配有公的“1/4-20UNC”螺丝，可以直接安装在底部有母的“1/4-20UNC”螺孔的数位相机或是防水壳上。
若要连接 INON LE/LF 系列 LED 摄影灯，可以使用 INON 的“三脚架用 LE/LF 单灯座”。
..
RMB259
品牌: INON
Model: 4562121436497
[说明]
●“Stick Arm”
・ Designed as a stick shape to have less water resistant, ample durability and super lightweight body all together.
・ Together with wide variety of optional accessories, “Lens Holder” or “Arm Float” is attached on the middle of..
RMB381
品牌: INON
Model: 4562121436480/4562121438750
[说明]
●“Stick Arm”
・ Designed as a stick shape to have less water resistant, ample durability and super lightweight body all together.
・ Together with wide variety of optional accessories, “Lens Holder” or “Arm Float” is attached on the middle of..
RMB320
品牌: INON
Model: 4562121436473/4562121438743
[说明]
●“Stick Arm”
・ Designed as a stick shape to have less water resistant, ample durability and super lightweight body all together.
・ Together with wide variety of optional accessories, “Lens Holder” or “Arm Float” is attached on the middle of..
RMB272
品牌: INON
Model: 4562121436466/4562121438736
[说明]
●“Stick Arm”
・ Designed as a stick shape to have less water resistant, ample durability and super lightweight body all together.
・ Together with wide variety of optional accessories, “Lens Holder” or “Arm Float” is attached on the middle of..
RMB231
品牌: INON
Model: 4562121436459/4562121438729
[说明]
●“Stick Arm”
・ Designed as a stick shape to have less water resistant, ample durability and super lightweight body all together.
・ Together with wide variety of optional accessories, strobe/LED flashlight is attached via “Shoe Base” or “Direct Ba..
RMB163
品牌: INON
Model: 4562121437180
[說明]
The 「Video Base V4」 is a dedicated optional accessory (*2)(*3) to attach lighting arm including 「Shoe Base」/「D Holder」 on Canon water-proof case「WP-V4」(*1). The 「Video Base V4」 is consists of a base plate which is specifically designed to match with unique base shape of Canon 「WP-V4」 and is..
RMB885
品牌: INON
Model: 4570018120374
[说明]
INON XD 冷靴镜头座 (Shoe Base)
可以直接连接到防水壳顶部的冷靴配件座。
无需灯臂即可放置镜头，从而使整个系统变得简洁。
实际安装例子: 搭配 Olympus PT-059 防水壳 (TG-6)..
RMB295
品牌: INON
Model: 4570018120329
[说明]
INON XD 镜头转接环 for M67 镜头罩，为了防止意外旋转和晃动，有包含旋转限位器。
[XD Mount 介绍影片]..
RMB295
品牌: INON
Model: 4570018120367
[说明]
INON XD 镜头座 M5 (for 浮力灯臂, 超浮力灯臂, 超浮力管, M5 Joint 转接头)
实际安装例子 1: INON 棒型灯臂 XS-T + INON M5 Joint 转接头
* M5 Joint 转接头为选购配件，转接棒型灯臂为必要配件
实际安装例子 2: 浮力灯臂 S (左边) 超浮力灯臂 S (右边) (M5螺丝包含在浮力灯臂内)..
RMB133
品牌: INON
Model: 4570018120305
[说明]
专为奥林巴斯“Tough TG”系列原厂防水壳和索尼“RX100”系列原厂防水壳设计的“XD卡口”转接环。 为了防止意外旋转和晃动，采用了与防水壳形状相匹配的旋转限位器。
此外，使用原装奥林巴斯外壳，即使安装了“广角转换镜头”和安装在外壳侧的“XD卡口”，也不会干扰光纤线连接， 闪光灯和“XD 镜头”可以一起使用，不需要额外的配件。如有任何疑问, 欢迎联络 [email protected]
旋转止动装置可防止安装件意外松动
即使安装了镜头也可以使用光纤线
容易安装
..
RMB295